Seat Removal/Installation; Steering Wheel Adjustment - Segway Villain SX10 Owner's Manual

Seat Removal/Installation

4、After installation, check whether the seat is installed in place to ensure the
safety of drivers and passengers.

Steering Wheel Adjustment

The steering wheel can be tilted up or down to suit the driver's driving preference
Adjust Angle of steering wheel up and down:
Do not loosen the adjustment lever of direction column after lifting it to the
direction of steering wheel. With the other hand, adjust it to the proper position by
moving it up or down to keep the steering wheel and release the adjusting lever.
After the steering wheel Angle adjustment, check whether the steering wheel is
locked in place.
Removal
1
Bolts
1、First remove the seat belt from the
seat
2、Remove the fixing bolts on both
sides of the seat cushion assembly.
3、Gently pull the seat forward and
pull out the wire harness under the
seat.
4、Remove the seat from the vehicle.
Installation
1、Plug in the harness under the seat.
2、Insert the two nylon buffer blocks
in the rear of the seat into the fixed
hooks on the vehicle.
3、Install the fastening bolts on the
left and right sides.
2-8