Segway SNARLER ATV 2021 Series Service Manual page 298

VEHICLE BODY AND FRAME
K
L
◆ Use a suitable tool to remove the 4 mounting screws
!
when assembling，use Thread glue to prevent the
J
screws from loosening and falling off .
◆ Use hose clamp pliers to remove the clamp【K】
◆ Use water pipe clamp pliers to remove the clamp
13 - 18
of the rear drive shaft and engine【J】Disconnect
the front drive shaft from the engine;
to remove the radiator outlet pipe, And drain the
coolant;
【L】to remove the water inlet pipe of the radiator,
And drain the coolant;