Segway SNARLER ATV 2021 Series Service Manual page 117

Item
Piston Pin:
Piston Pin O.D.
Piston Ring:
Installed Gap:
Top Ring
Second Ring
Oil Control Rails
Ring/Groove Clearance:
Top Ring
Second Ring
Piston ring groove width:
Top Ring
Second Ring
Piston ring thickness:
Top Ring
Second Ring
Camshafts:
Cam Lobe height:
Exhaust
Intake
Camshaft journal diameter - All:
Camshaft Journal Bore diameter - All:
Camshaft Oil Clearance:
Camshaft End Play:
Camshaft runout:
Automatic Compression Release:
operating engine speed:
Connecting Rod:
Connecting Rod Small End I.D.
Main Journal O.D.
Crankshaft Runout Limit
Balance Shaft:
Bearing Journal O.D.
Standard
21.995 ~ 22.000 mm (0.8659" ~ 0.8661") 21.975(0.8652")
0.20 ~ 0.35 mm (0.0079" ~ 0.0138")
0.35 ~ 0.55 mm (0.0138" ~ 0.0217")
0.20 ~ 0.70 mm (0.0079" ~ 0.0276")
0.020 ~ 0.060 mm (0.0007" ~ 0.0023")
0.020 ~ 0.060 mm (0.0007" ~ 0.0023")
1.22 ~ 1.25 mm (0.0480" ~ 0.0492")
1.22 ~ 1.25 mm (0.0480" ~ 0.0492")
1.17 ~ 1.19 mm (0.0461" ~ 0.0469")
1.17 ~ 1.19 mm (0.0461" ~ 0.0469")
40.08 ± 0.04 mm (1.5780" ± 0.0015")
40.36 ± 0.04 mm (1.5890" ± 0.0015")
22.954 ~ 22.975 mm (0.9036" ~ 0.9045")
23.000 ~ 23.021 mm (0.9055" ~ 0.9063")
0.025 ~ 0.067 mm (0.0009" ~ 0.0026")
0.10 ~ 0.25 mm (0.0039" ~ 0.0098")
TIR 0.02 mm (0.0008") or less
450 ± 50 rpm
22.010 ~ 22.023 mm (0.8665" ~ 0.8670")
40.995 ~ 41.005 mm (1.6140" ~ 1.6144")
– – –
29.980 ~ 29.993 mm (1.1803" ~ 1.1808") 29.92 mm (1.1780")
3-5-7
ENGINE TOP END ENGINE TOP END
Service Limit
0.5 mm (0.0197")
0.7 mm (0.0276")
0.9 mm (0.0354")
0.12 mm (0.0047")
0.12 mm (0.0047")
1.32 mm (0.0520")
1.32 mm (0.0520")
1.10 mm (0.0433")
1.10 mm (0.0433")
39.99 mm (1.5744")
40.27 mm (1.5854")
22.944 mm (0.9033")
23.044 mm (0.9072")
0.1 mm (0.0039")
0.4 mm (0.0157")
TIR 0.1 mm (0.0039")
– – –
22.06 mm (0.8685")
40.97 mm (1.6129")
Less than 0.025 mm
(0.001")