A A
C C
B B
ENGINE-ELECTRICAL SYSTEM
ENGINE-ELECTRICAL SYSTEM
Alternator Rotor Removal
Alternator Rotor Removal
◆ Remove:
1. Alternator Cover (see Alternator Cover Removal)
2. Alternator rotor Nut M18×1.5【A】
3. Thread the flywheel puller【B】onto the alternator
rotor.
Special Tool - Flywheel Puller: : E01GZ0010001
Special Tool - Flywheel Puller
Flywheel Holder
Flywheel Holder: : E01GZ0050001
◆ Holding the Flywheel Holder
Flywheel Holder【 【 B B 】 】 , turn the rotor
puller【C】until the alternator rotor is forced off the
end of the crankshaft.
CAUTION
CAUTION
If the rotor is difficult to remove, turn the puller while
tapping the end of the puller. Do not strike the alternator
rotor. Striking the rotor can cause the magnets to lose
magnetism.
3-3-7
E01GZ0010001
E01GZ0050001