Segway SNARLER ATV 2021 Series Service Manual page 255

A
!
A
◆ Support the rim【A】on a suitable bracket【B】to
prevent the tire from slipping off .
◆ Infl ate the tire until the rim is fi xed to the tire rim.
Maximum air pressure of tire (fixed on wheel when
cold)
front and rear: 50 kPa (2.5 KGF /cm, 36 psi)
!
Do not infl ate the tire above the maximum tire pressure.
Overinfl ated air can cause a tire to explode, potentially
B
causing injury and death.
◆ Check whether the rim lines【A】on both sides of
the tire are parallel to the rim fl ange【B】.
◆ If the rim lines are not parallel to the rim flange,
bleed the tire, moisten the sealing surface again,
and infl ate it again.
◆ Check whether there is air leak after the tire is in
place correctly.
◆ Apply soap solution around the tire tire rim, and then
B
check for air bubbles.
◆ Bleed the tire to the specifi ed pressure.。
◆ Check the tire pressure with the barometer.
Segway off ers tire pressure gauges and user kits.
Tire pressure (in cold state)
Front: 48.3 kPa (0.49 KGF /cm2, 7.0 psi)
Rear: 48.3 kPa (0.49 KGF /cm2, 7.0 psi)
◆ Wheel mounting (see Wheel mounting).
◆ Wipe the soap and water solution from the tire and
dry the tire before operation.
!
Do not operate the vehicle while soap and water are still
around the wheel rim, it can cause tyre separation and
can lead to dangerous conditions.
◆ Tire Inspection
◆ Refer to the "Wheels/Tires" section of the Regular
Maintenance section.
10 - 11
WHEELS AND TIRES