Segway SNARLER ATV 2021 Series Service Manual page 226

A
C
B
D
Drive Axle Disassembly
!
◆ Do not remove the dust boot when the drive axle is
removed, it is full of grease.
A
◆ Please do not pull out the drive axle when
d i s a s s e m b l e i t , w h i c h m a y d a m a g e t h e
intermediate axle clip and cause the ball cage to
fall out.
【A】Front constant speed drive axle assembly
【B】RL constant speed drive axle assembly
【C】RR constant speed drive axle assembly
Remove the drive axle from the fixed end of the drive
axle (wheel end)
◆ Remove the wheel and suspension components
before the axle assembly(see the wheels & tires and
suspension chapters for more details)
【D】Axle Support
◆ Pull out the axle support from the drive axle in the
direction indicated by the arrow in the left picture.
◆ Pull out the drive axle from the axle in the direction
indicated by the arrow in the left picture.
◆ If it is diffi cult to pull out the axle, use tools to pry at
the point 【E】 until it is loose enough to be pulled
out.
E
8 - 3
DRIVE SYSTEM