Segway SNARLER ATV 2021 Series Service Manual page 171

CVT SYSTEM CVT SYSTEM
G G
H H
4. Align the match–marks on the sheaves, made when
B B
A A
5. Install the guide bar of the spring holder set【C】into
F F
E E
6. Put the Driven Pulley【E】onto the Dirven Fixed
7. Tighten the Bolt【G】, and compress the spring with
D D
8. Install the circlip【H】with the circlip pliers.
C C
9. Remove the driven pulley from the spring holder set.
10. Clean the surface of the sheaves with an oil-less
disassembled, and the openings【A】and grooves
【B】will be matched easily.
the Dirven Pulley Guide Seat Assembly【D】.
Special Tool -
Spring Holder Set
Shaft【D】of the Dirven Pulley Guide Seat Assembly
the spring holder【F】.
Special Tool - Circlip Pliers : E01GZ0060001
cleaning fl uid.
3-6-20
: E01GZ0050001