B B
A A
G G
H H
C C
D D
Driven Pulley Assembly
Driven Pulley Assembly
1. Assemble the Dirven Pulley Guide Seat Assembly
E E
2. Install the Spring【F】.
F F
3. Install the Movable Sheave Assembly【G】.
Apply molybdenum disulfi de grease to the inner surfaces
【H】of the bushings.
◆ Check the guide Surfaces【D】of the Driven Pulley
Guide Seat【B】
◆ If any of the guide Surfaces appear damaged,
replace the Driven Pulley Guide Seat.
Circlip【A】
Dirven Pulley Guide Seat【B】
Dirven Fixed Shaft【C】
◆ Clean off any grease or dirt on the movable and
fi xed sheaves, and dry them with a clean cloth.
◆ Install :
【E】.
3-6-19
CVT SYSTEM
CVT SYSTEM