Segway SNARLER ATV 2021 Series Service Manual page 370

ELECTRICAL SYSTEM
E
D
CLR
FUNC
CLR
Gr/R
FUNC
A
B
C
W/L
B/W /
/
【A】Starting button
【B】Left and right turn signal switch
【C】Stop switch
When the engine is running, press the stop switch button
to stop the engine;
when the engine is stopped, fi rst pop up the stop switch
button, and then press the starting button to start the
engine;
When the function fails, check the related circuit fi rst;
when there is no problem in the check circuit, test the
internal circuit of the fl ameout switch;
!
Press the start button to start the engine only when the
fl ameout switch is in the unpressed state
Check ignition key
→
When the flameout switch bounces, black white and
white blue should be able to conduct, and when the
start button is pressed at this time, gray red, black
white, white blue should be able to conduct; when
the fl ameout switch is pressed, black white and white
blue cannot be conducted. And when the start button
is pressed at this time, the gray-red, black-and-white,
white-blue cannot be conducted; And when the start
button is pressed at this time, the gray-red, black-and-
white, white-blue cannot be conducted;
14 - 62