Segway SNARLER ATV 2021 Series Service Manual page 67

A A
C C
H H
A A
B B
E E
CRANKSHAFT / TRANSMISSION CRANKSHAFT / TRANSMISSION
◆ Install:
Transmission Shaft【A】and new Bearing 6205【B】.
◆ Press and insert the bearings until they are
Special Tool - Bearing Driver Set: Special Tool - Bearing Driver Set:
【B】 Ball Bearing : 6205
B B
◆ Install:
【C】Nut M55×1.5×6-LH
◆ Tighten:
Torque
D D
◆ Apply a non-permanent locking agent to the Nut
◆ Install:
Grease the lip【A】of the oil seal 44×60×7【D】and
press the seal 1.0 mm【H】inwards from the end of the
boss.
D D
◆ Install:
insert the O-Ring 20×2.65【E】to the Transmission Shaft
Flange【B】.
◆ Apply engine oil to the O-Ring【E】
Washer 12.5×32×5【F】
Bolt M12×1.25×30【G】
F F ◆ Tighten:
Torque
G G
◆ Apply a non-permanent locking agent to the Bolt
3-2-17
bottomed.
Nut【C】
120 N·m (12 kgf·m, 89 ft·lb)
【C】
Bolt M12【G】
120 N·m (12 kgf·m, 89 ft·lb)
【G】.