Segway SNARLER ATV 2021 Series Service Manual page 274

B
C
D
D
A
Rear brake pedal disassembly
【A】brake pedal
【B】retainer ring
【C】fl at gasket
【D】brake pedal fl anging bushing
◆ Use the pliers to remove the retainer ring 【B】
◆ Remove the fl at gasket 【C】
◆ Remove the brake pedal【A】assembly
◆ Remove 【D】 from the brake pedal
Rear brake pedal installation
Apply grease to the end of brake pedal shaft 【A】
◆ Install 2 pieces of brake pedal flanging bushing
【D】into brake pedal
◆ Put on fl at gasket【C】
◆ Then install the retainer ring【B】in place.
11 - 15
BRAKE SYSTEM