Segway SNARLER ATV 2021 Series Service Manual page 194

FRONT AND REAR DIFFERENTIAL FRONT AND REAR DIFFERENTIAL
B B
A A C C E E
Gear clearance adjustment
WARNING WARNING
! !
If the gear gap is not adjusted well, it will aggravate
the wear of gear parts, resulting in abnormal gear
transmission noise, gear surface pitting, reduced
transmission effi ciency, and shortened overall life.
【A】Driving bevel gear assembly
【B】Hexagon fl ange bolts M8×25
【C】Active bevel adjustment washer
【E】Rear Diff erential housing
Disassembly
Tools: open-end wrench 10mm
◆ Use an open-end wrench to remove 【B】 from
【E】 by turning counterclockwise
◆ Push out 【A】 as a whole by 10cm-15cm, and take
out 【C】
Installation
Tools: open-end wrench 10mm
◆ Take 【C】 corresponding thickness according to
the gear clearance value, put 【C】 between 【E】
and 【B】, push in 【A】
◆ Use an open-end wrench to turn it clockwise to
tighten it, reconfi rm the gear gap, and wipe clean the
gear oil spilled around it.
4 - 22