Segway SNARLER ATV 2021 Series Service Manual page 68

CRANKSHAFT / TRANSMISSION CRANKSHAFT / TRANSMISSION
H H
A A
D D
G G
N N
F F
C C
B B
A A
F F
M M
E E
◆ Press and insert the bearings until they are
bottomed.
Special Tool - Bearing Driver Set Special Tool - Bearing Driver Set
【A】Ball Bearing : 6305
【C】Ball Bearing : 6207
◆ Install:
Nut M65×1.5×8-LH【B】 (Left-hand Threads)
◆ Tighten:
Torque
137 N·m (14 kgf·m, 106 ft·lb)
◆ Apply a non-permanent locking agent to the Nut
【B】
◆ Install:
Grease the lip【A】of the oil seal 44×60×7【D】
and press the oil seal 2.2 mm【H】inwards from
the end of the boss.
◆ Install:
insert the O-Ring 20×2.65【N】to the Transmission
Shaft Flange【M】.
◆ Apply engine oil to the O-Ring【N】
◆ Install:
Driven Bevel Gear【E】
Washer 12.5×32×5【F】
Bolt M12×1.25×30【G】
◆ Tighten:
Torque
Bolt M12【G】
120 N·m (12 kgf·m, 89 ft·lb)
◆ Apply a non-permanent locking agent to the Bolt
【G】.
◆ Install:
【J】O-Ring 88×2.8
◆ Apply engine oil to the O-Ring【J】
3-2-18
Nut【B】