Cylinder Head Installation - Segway SNARLER ATV 2021 Series Service Manual

ENGINE TOP END ENGINE TOP END
A A
D D
A A
3 3
1 1

Cylinder Head Installation

Cylinder Head Installation Cylinder Head Installation
B B
◆ Install:
Dowel Pins【A】
New Cylinder Head Gasket【B】
C C
Camshaft Chain Guide【C】
Camshaft Chain Guide【D】
Shoulder Bolts【E】(using a T40 driver)
◆ Tighten:
Torque
E E
◆ Apply a non-permanent locking agent to the bolts
B B
C C
◆ Install:
Cylinder Head Assembly【A】
Cylinder Head Bolts M11 ×1.25×150【 B】
Bolts M6 ×90【 C】
◆ Tighten the cylinder head bolts (M11)【B】 following
2 2
First Torque
Final Torque
4 4
Tighten the Bolts M6×90【C】.
Torque
Shoulder Bolts
9.8 N·m (1.0 kgf·m, 87 in·lb)
【E】.
the tightening sequence as shown.
Cylinder Head Bolts (M11)【B】
25 N•m (2.5 kgf•m, 18 ft•lb)
Cylinder Head Bolts (M11)【B】
75 N•m (7.7 kgf•m, 54 ft•lb)
Bolts M6×90【C】
9.8 N•m (1.0kgf•m, 87in•lb)
3-5-34