Seat; Seat Installation - Segway AT5 S Owner's Manual

SEAT

Seat removal
The seat is a snap-on quick release part.
1. Hook the seat hook with your fingers and move it upward.
2. Lift the seat upward after it springs open.
3. Remove the seat.
There is a cable connection under the seat, please be careful when

SEAT INSTALLATION

Insert the lug on the front of the seat into the center of the U-
bracket welded to the frame, push the seat forward firmly and
press the seat down to lock it.
After the seat is installed, double-check that the seat is secure.
NOTICE
removing the seat and moving it upwards.
!
VEHICLE DEVICE
CAUTION
53