Battery; Remove The Battery; Turn Off Ignition Switch - Segway SNARLER ATV 2021 Series Service Manual

Table of Contents

Advertisement

ELECTRICAL SYSTEM
B

Battery

Remove the battery

【A】positive(+)
A
【B】negative(-)
◆ Turn off ignition switch.
◆ Remove seat(Please read frame and body section)
◆ Loosen the bolts on the battery seat
◆ Remove the battery bracket.
◆ First disconnect the battery negative (-) cable, then
disconnect the positive (+) cable.
◆ Take out the battery
Turn off ignition switch
Place the battery in place with the battery box and
retainer.
◆ First connect the battery positive (+) cable, then
connect the negative (-) cable.
◆ Thin grease is applied to the terminals to prevent
corrosion.
◆ Tighten the battery seat bolts. Match the model
name of the battery. These names must be the
same.
Battery model Name:GHD32HL-BS
!
This battery is a colloidal battery and does not need to
add electrolyte.
14 - 8

Advertisement

Table of Contents
loading

Table of Contents