Driver Seat Removal/Installation - Segway FUGLEMAN UT10 2022 Owner's Manual

VEHICLE DEVICE VEHICLE DEVICE

Driver seat removal/installation

Driver seat removal
1. Move the seat lock pin to the outside.
2. Gently pull the seat forward, and pull out the cable connector
under the seat.
3. Remove the seat from the vehicle.
Driver seat installation
1. Plug the cable connector under the seat.
2. Insert the two fixing pins behind the seat into the hooks.
3. Turn the seat to lock the lock pin of the seat and frame.
After installation, check whether the seat is installed in place to
ensure the driver's safety.
seat lock pin
42