Micromeritics DVVA II 4000 Operator's Manual page 171

DVVA II 4000
Sequence
Sample
400-42803-01 (Rev B) - July 2017
Specify a default sequence for the sample file name. The
number you specify is sequenced incrementally each time you
create a sample fileand is the one that appears in the File name
field when you select File > Open > Sample Information.
• Use numbers, letters, or other printable characters, such as
dashes. At least three numbers must be included
• Use up to eight characters
• The application prohibits using such characters as * or ?
Enter an additional identification that provides more
information than the sample file name alone.
In the field on the left, edit the prompt if desired. For example,
you may prefer to use Test or Material. The maximum number
of characters is 20.
In the field on the right, specify a format for the sample
identification.
• Use numbers, letters, or other printable characters, such as
dashes.
• Use up to 42 characters (including the $ symbol if used)
• Include the automatically generated file name as part of the
identification by using the $ symbol where you want the
sequence number to appear.
For example, if the sequence number is 000-001, enter the
sample identification as follows:
Lab #25 - $
The resulting sample identification for the first sample infor-
mation file would be:
Lab #25 - 000-001
and the second:
Lab #25 - 000-002, and so on.
Sample Defaults
8-11