Using The Setup Program For Other Functions - Micromeritics DVVA II 4000 Operator's Manual

Using the Setup Program for Other Functions

Using the Setup Program for Other Functions
After initial installation of the DVVA II 4000 program, the application setup program can be
used to:
• Upgrade software, page
• Add an Analyzer, page
• Move an analyzer from one computer to another computer, page
• Remove an analyzer from the computer, page
• Reinstall calibration files, page
• Uninstall the analysis program, page
Change Analyzer Setup and Reset Security to Default menu items are not applicable for the
DVAAII 4000.
To start the application setup program:
1. Ensure that the analysis program is not operating and the analyzer is idle.
2. Insert the CD-ROM into your CD-ROM drive.
Proceed to Step 5 if AutoPlay is enabled on your computer; Setup will start
automatically and display the New Installation dialog.
3. Select Start from the Status bar, then Run from the Start menu.
4. Enter the drive designator of the CD-ROM drive, followed by setup. For example: e:setup.
Alternatively, you can click
5. Click ; the setup Welcome screen showing the options available is displayed.
OK
4-10
4-12
4-13
4-17
4-18
4-19
, navigate to your CD-ROM drive, and select setup.exe.
Browse
DVVA II 4000
4-14
400-42803-01 (Rev B) - July 2017