Micromeritics DVVA II 4000 Operator's Manual page 169

DVVA II 4000
Bulk Density
User Parameters
Material Properties
Comments
Add Log Entry
400-42803-01 (Rev B) - July 2017
Enter the bulk density of your most commonly analyzed
sample.
The fields in this group box can be used for SPC (Statistical
Process Control) reporting. They are used to specify character-
istics of the sample or its manufacturing process, as well as to
enter constants to be included in User Model formulae.
Once specified, these parameters display on the sample editor
and in the SPC Sample Options dialog.
These fields can also be used to record analysis conditions or
sample information so that it can be printed on the Summary
report.
Select to prevent them from displaying on the sample
Omit
information dialog.
Enter the type of sample material you are analyzing.The
Material type is used to determine which carbon property
models are used for this particular carbon. For example, a
different equation is used to predict COAN for Tread/Hard
carbons than for Carcass/Soft carbons. If you select Other, the
COAN is not calculated.
Choose Other only when your material is something other than
Tread/Hard or Carcass/Soft.
Enter comments about the sample or its analysis conditions.
Comments entered here are printed in the header of the reports.
Displays the Add Log Entry dialog, enabling you to enter
comments about the sample or its analysis conditions.
Anything you enter using this option appears in the Sample
Log; it does not display in the report header.
Sample Defaults
8-9