Micromeritics DVVA II 4000 Operator's Manual page 147

DVVA II 4000
Limit Lines
Tabular report
Recalculate archived
SPC results
Samples
400-42803-01 (Rev B) - July 2017
Displays the options available for limiting lines. You can have
the lines placed at some multiple of the standard deviation or at
specified positions (Entered).
When you select Entered, the High limit and Low limit fields
are enabled, allowing you to enter appropriate values.
Generates tabular, as well as graphical, data of the included
samples. A tabular report contains the numeric values
contributed by each sample.
Select this option to have archived SPC values recalculated.
This ensures that any changes made to the SPC Report Options
are included in the new report. It also lengthens the time
required to generate the report.
Displays the Control Chart Sample Selection dialog, for you to
choose the sample files to report.
This dialog functions in the same manner as the Regression
Report Sample Selection Dialog explained earlier in this
chapter. Refer to page
7-6
this dialog.
if you need assistance on the fields of
Control Chart
7-11