Micromeritics DVVA II 4000 Operator's Manual page 87

DVVA II 4000
Bar code
Mass
Skeletal Density
Bulk Density
User Parameters
Comments
400-42803-01 (Rev B) - July 2017
This field enables you to enter bar code information. If bar
code information is not used, you can use this field to enter
additional information about the sample; for example, you may
wish to enter the lot number of your sample.
This field, as well as other fields on the dialog, accepts data
from a bar code reader. A bar code reader can be attached to
one of the USB connectors on the computer. Simply scan the
bar code and the number transfers to the highlighted field.
Range: 40 alphanumeric characters
The label for this field may be customized to display differently
or omitted from displaying at all using the options available in
Defaults, page 8-6.
Sample
Enables you to enter the mass of the sample; 1.0000 gram, ±
0.05 (determined to nearest 0.0001 gram) is the recommended
amount of sample to use.
Enables you to enter the skeletal density (also known as the true
density) of your sample.
Enables you to enter the bulk density (sometimes referred to as
pour density) of your sample.
The fields in this group box can be used for SPC (Statistical
Process Control) reporting. They are used to specify character-
istics of the sample or its manufacturing process, as well as to
enter constants to be included in User Model formulae.
Once specified, these parameters display on the sample editor
and in the SPC Sample Options dialog.
These fields can also be used to record analysis conditions or
sample information so that it can be printed on the Summary
report.
If desired, you can have these fields omitted from the sample
information file (refer to
Enter comments about the sample or its analysis conditions.
Comments entered here are printed in the header of the reports.
This field will accept up to 500 characters.
Defaults, page 8-6).
Sample
Open
5-5