Micromeritics DVVA II 4000 Operator's Manual page 98

Open
Top-of-Sample Height
Void Volume
Blank Details
Residual Void Volume
Pressure Table
Insert
Delete
Clear
Ctrl + Down Arrow
5-16
Calculates the distance from the top of the sample chamber to
sample contact.
Reports the void volume at a specified pressure.
Provides the stored parameters for the blank analysis.
Reports residual void volume of the sample. Includes the
residual top-of-the sample height, the residual force
measured on the lower load cell, and the hold time.
Enables you to specify up to 999 pressure points at which to
interpolate collected data; less than 10 is typical.
Use the , , and
Insert Delete
Down Arrow to assist you in creating your table.
Inserts a line above the selected line.
Deletes the selected line.
Clears the table of all entries except one; one is required.
Appends a new line at the bottom of the table.
DVVA II 4000
push buttons and Ctrl +
Clear
400-42803-01 (Rev B) - July 2017