Creating Sample Information Files; Advanced Format - Micromeritics DVVA II 4000 Operator's Manual

Creating Sample Information Files

Creating Sample Information Files
A sample information file must be assigned to every sample that is analyzed. When you create a
sample file, you can accept the default values or edit them as desired. You can create a sample
information file using the Advanced, Basic, or Restricted format.

Advanced Format

The Advanced format allows you to customize the parameters of a sample information file. Refer
to Advanced, page
tion files in the Advanced format.
1. Select File > Open > Sample Information; the Open Sample Information File dialog is
displayed.
2. Accept the next sequenced file number or enter a new name in the File name field; you can
use up to eight characters.
3. Click , then
OK
These fields do not
display if you individu-
ally selected Omit
when specifying sam-
ple defaults.
The values that appear in the fields are the ones specified in Sample Defaults.
4. Accept the default identification in the Sample field or change it to an appropriate one. The
dialog in Step 3 shows the sample file number because the dollar ($) symbol was used when
specifying sample defaults.
If a sample information file already exists containing the values you wish to use in this
file, you can click Replace All to copy them into this one. You can still edit the values
after they are imported.
5. Edit the Operator and/or Submitter fields as needed.
3-6
for a description of the fields associated with creating sample informa-
5-4
to create the file; the Sample Information dialog is displayed.
Yes
DVVA II 4000
400-42803-01 (Rev B) - July 2017