Reports Menu; Description - Micromeritics DVVA II 4000 Operator's Manual

DVVA II 4000
The commands on the Reports menu enable you to:
• start, close, and open reports
• specify SPC report options
• generate SPC reports
This chapter also provides information on the tools available for customizing and manipulating
onscreen reports
Reports can be generated for data collected on a sample that has completed analysis, or on one
that is currently being analyzed (includes only data collected up to the time of the report).

Description

Listed below are brief descriptions of the commands contained on the Reports menu. Detailed
descriptions are in subsequent sections.
Start Report
Close Reports
Open Report
SPC Report Options
Regression Report
Control Chart
400-42803-01 (Rev B) - July 2017

7. REPORTS MENU

Generate a report on a completed sample analysis or on the data
collected thus far for an analysis in progress. Page 7-2.
Close all open report windows. Page 7-4.
Open a report that was saved from the report window. Page 7-4.
Specify sample data to include in SPC reports. Page 7-5.
Generate a regression report. Page 7-6.
Generate a control chart report. Page 7-9.
Description
7-1