Micromeritics DVVA II 4000 Operator's Manual page 48

Performing an Analysis
6. Enter the sample weight in the Mass field and verify values for other parameters.
7. Click
Report After Analysis
automatically after the analysis.
8. Click
Export After Analysis
after the analysis.
9. Click
Start.
• If a blank analysis is to be run, the analysis proceeds. When the analysis is complete, the
dialog shown in step 10 displays.
• If a blank analysis is not to be run, go to step 10.
10. A dialog prompting you to load the sample is displayed.
DO NOT click
3-16
and choose report output options to generate reports
and choose export options to export report data automatically
before completing the tasks in the dialog.
OK
DVVA II 4000
400-42803-01 (Rev B) - July 2017