Micromeritics DVVA II 4000 Operator's Manual page 44

Creating Parameter Files
6. Choose the type of pressure to be interpolated for the user defined tabular reports, the
Summary Report, the Pressure Table Report, and the void volume normalization.
Applied: the force of the upper piston only.
Geometric Mean: the calculated geometric mean of the applied (upper piston) and transmit-
ted (lower piston) forces.
7. Click Normalize Void Volume to have the void volume data normalized to a reference
model.
8. If you wish to compare the same type of graph from multiple files, click
choose the files. Be sure to edit the graph from the Selected Reports window and choose
Samples from the Overlay drop-down list. (Refer to
for additional information on overlays.)
27
9. Double-click on the report to select it (a check mark indicates selection). Reports are
deselected in the same manner.
You can edit some reports by highlighting and selecting the desired report; then click
(refer to
Report
10. Click
Save
3-12
Options, page 5-12).
, then
Close
Overlays
Overlays, page
Generating Graph
400-42803-01 (Rev B) - July 2017
DVVA II 4000
and
3-
Edit