Installing Subsequent Software Versions - Micromeritics DVVA II 4000 Operator's Manual

Using the Setup Program for Other Functions

Installing Subsequent Software Versions

When you install a software upgrade, existing data files are not overwritten. There are three types
of subsequent installations; the software version controlled by the setup program is:
• a later version than the version installed on the computer
• the same version as the version installed on the computer
• an earlier version than the version installed on the computer
The setup program automatically detects which type of installation applies and customizes the
selection in the Setup dialog accordingly.
1. Start the Setup program. Refer to
10.
2. Choose the software option (only the applicable option is displayed); it will be one of the
following:
• Upgrade software to version (number) from version (number)
• Reinstall software version (number)
• Downgrade software to version (number) from version (number)
3. Click
Start File Installation
dialog is displayed. If no other operations are desired using this dialog, click
dialog.
4-12
Using the Setup Program for Other
; the application installs the software and the setup Welcome
DVVA II 4000
Functions, page
to close the
Exit
400-42803-01 (Rev B) - July 2017
4-