Micromeritics DVVA II 4000 Operator's Manual page 227

DVVA II 4000
2521- Unable to program controller.
Cause:
Action:
2522- Invalid controller application file.
Cause:
Action:
2523- Programming the controller failed.
2524- CRC check failed on programming controller.
2525- Unknown error programming controller.
2526- Controller download was not successful.
Cause:
Action:
2532- The instrument contains a different software version. Do you want to reset it?
Cause:
Action:
2533- Analyzer initialization failed.
Cause:
Action:
400-42803-01 (Rev B) - July 2017
A hardware malfunction has occurred.
Contact your local Micromeritics service representative.
The application's control file has been corrupted or deleted.
Reinstall the analysis program.
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this error
message.
The application has discovered a different version of software operat-
ing in the analyzer.
If there are no analyzers other than the DVVA connected to the com-
puter, select and allow the updated software to load.
Yes
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this error
message.
Appendix A
A-13