Adding An Analyzer - Micromeritics DVVA II 4000 Operator's Manual

DVVA II 4000

Adding an Analyzer

This option it not available if a DVVI II 4000 is currently installed on the computer. If however,
no analyzer is currently installed on the computer, either from removing the analyzer using the
setup program, or if the software was originally installed with 0 instruments, you may use this
option to attach an analyzer to the computer.
1. Start the Setup program. Refer to
10.
2. In the Setup dialog choose Adding an Analyzer. The Setup analyzer being added dialog is
displayed.
3. Enter the serial number of the analyzer, then click
Welcome screen is again displayed.
4. Click
Exit
400-42803-01 (Rev B) - July 2017
Using the Setup Program for Other
to close the dialog.
Using the Setup Program for Other Functions
Functions, page
. The analyzer is added and the
Next
4-
4-13