Dots - Canon REALiS SX6 User Manual

User Command Specifications
1

DOTS

DOTS
Commands
Function Total number of dots adjustment
Format DOTS=<Number of dots: Number>
Parameter Number of dots
The RANGE command can be used to obtain the parameter range that can be set at
that time.
For details, refer to the RANGE command.
Response "i:OK" is returned if the parameter was set properly.
For all other responses, refer to "Error List."
Description 1 This designates the total number of dots for one horizontal period.
-1 It can be executed when the projector is in both the remote mode and power-on status at the
same time.
A "busy" response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
Furthermore, it may not be possible to execute the command with some input signals.
-2 This command is the same as the menu functions in the table below.
Model
SX50
SX6
SX60
X600
-3 The GET command can be used to obtain the current total number of dots.
For details, refer to the GET command.
Example Setting
> DOTS=1650
< i:OK
Reference
> GET DOTS or ?DOTS
< g:DOTS=1200
Obtain settable parameter range (Min, Max)
> RANGE ＤＯＴＳ
< r:DOTS=N, 0, 4096
* Commands are indicated by ">", and responses are indicated by "<".
Commands
SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
× × ×
SX50 ○
SX6 × × ×
○
SX60
X600
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
Menu
[Display settings] - [Input signal settings] - [Total number of dots adjustments]
[Display settings] - [Input signal settings] - [Total number of dots]
The total number of dots is 1650.
This retrieves the total number of dots.
Any value from 0 to 4096 can be set for the total dots.
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video D-Video SCART
× × ×
○ ○
× × ×
○ ○
Mode Control Setting Reference
Mode
None Remote
– – ×
○
× × ×
○
PAGE 21
9. Details of command DOTS
Number
Remarks
Local
×
×