Adjusting The Input Signal (Total Dots); Adjusting The Input Signal (Tracking) - Canon WUX450 User Manual

Adjusting the Input
Signal
(Total dots)
> [Input settings] > [Input signal
[Total dots]
settings] >
HDMI Component
Digital PC Analog PC
You can adjust the total number of
dots in the horizontal direction.
Adjust it when stripes are displayed
on the screen.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this adjustment if the Auto PC
function (P57) cannot adjust the projected
image correctly.
Setting Display Status (Input Settings)
Adjusting the Input
Signal
(Tracking)
> [Input settings] > [Input signal
settings] >
LAN HDMI
USB Digital PC
You can fine-tune the timing for
generating an image from the image
signal.
Adjusts the tracking when the image
distorts or flickers.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this adjustment if the Auto PC
function (P57) cannot adjust the projected
image correctly.
89
[Tracking]
Component LAN
Analog PC USB