Vks/Hks - Canon REALiS SX6 User Manual

User Command Specifications
1

VKS/HKS

VKS/HKS
Commands
Function Vertical/Horizontal keystone setting
Format VKS=<Vertical keystone distortion value: Number>
HKS=<Horizontal keystone distortion value: Number>
Parameter Vertical/horizontal keystone distortion values
The RANGE command can be used to obtain the parameter range that can be set at
that time.
For details, refer to the RANGE command.
Response "i:OK" is returned if the parameter was set properly.
For all other responses, refer to "Error List."
Description This sets the vertical and horizontal keystones.
-1 It can be executed when the projector is in both the remote mode and power-on status at the
same time.
A "busy" response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
-2 This command is identical to pressing the "KEYSTONE" button on the remote control or front pa
-3 The settable keystone range varies depending on the input signal, screen size, number of
horizontal and vertical dots, and other factors.
-4 Changing the vertical keystone value modifies the setting range of the horizontal keystone
value, and changing the horizontal keystone value modifies the setting range of the vertical
-5
Use the "RANGE" command to obtain the range of settable values immediately before setting
the vertical value and horizontal value.
-6 The GET command can be used to obtain the current vertical/horizontal keystone value.
For details, refer to the GET command.
Example Setting
> VKS=-23
< i:OK
> HKS=10
< i:OK
Reference
> GET VKS or ?VKS
<
g:VKS=-23
> GET HKS or ?HKS
< g:HKS=-23
Obtain settable parameter range (Min, Max)
> RANGE HKS
< r:HKS=N,-30,30
* Commands are indicated by ">", and responses are indicated by "<".
Commands
SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
× ×
SX50 ○ ○
SX6 × ×
○ ○
SX60
X600
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* If the necessary signals are not input, 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
This sets the vertical keystone to –23.
This sets the horizontal keystone to 10.
This retrieves the vertical keystone.
This retrieves the horizontal keystone.
Any value from -30 to 30 can be set for the horizontal
keystone distortion.
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video D-Video SCART
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Mode Control Setting Reference
Mode
None Remote
– – ×
○
○ ○ ○ ○
PAGE 48
9. Details of command VKS/HKS
Number
Remarks
Local
×
×