Range Rgboffset - Canon REALiS SX6 User Manual

User Command Specifications
1

RANGE RGBOFFSET

RANGE RGBOFFSET
Commands
Function RGB offset adjustment range inquiry
Format RANGE□RGBOFFSET
Response
r:RGBOFFSET=N, <R minimum value>, <R maximum value>, <G minimum value>, <G
maximum value>, <B minimum value>, <B maximum value>
For all other responses, refer to
Description This command is used to inquire about the current RGB offset adjustment values.
(1) This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the
(2) The RGB offset can be set using the
Example > RANGE RGBOFFSET
< r:RGBOFFSET=N, -20, 20, -20, 20, -20, 20
*Commands are indicated by ">", and responses are indicated by "<".
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
Model Power supply
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
SX50
－ － － －
SX6
× ○ × ○
SX60
X600
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
"Error List."
ZCONTDRV command and FCONTDRV command.
RGBOFFSET command
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video D-Video SCART
－ － － － －
○ ○ ○ ○ ○
Mode Control
）
.
Mode
None Remote
－ － － －
○ ○ ○ ○
PAGE 150
９．Details of command RANGE RGBOFFSET
Setting
Reference
Number
Remarks
Local
－
×