Wbrgb - Canon REALiS SX6 User Manual

User Command Specifications
1

WBRGB

WBRGB
Commands
Function Screen color correction (ADJUST)
WBRGB=<R adjustment value: Number>▽<G adjustment value: Number>▽<B
Format
adjustment value: Number>
Parameter RGB setting value (Each value –20 to 20)
The RANGE command can be used to obtain the parameter range that can be set at
that time.
For details, refer to the RANGE command.
Response An 'i:OK' is returned after setting is successful.
For all other responses, refer to "Error List."
Description This sets the RGB adjustment values of the screen color correction.
-1 It can be executed when the projector is in both the remote mode and power-on status at the
same time.
A "busy" response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
-2 Although this setting is enabled when Adjustment (ADJUST) is selected by the screen color
correction command (WB), it can be made independently.
-3 This command is the same as the menu functions in the table below.
Model
SX50
SX6
SX60
X600
-4 With this command, the R, G, and B values can be set in a single operation.
-5 When the model SX50 is used, the currently selected input signal and image mode settings are
When the model SX6, SX60 or X600 is used, a set of settings is established for the system.
-6 The GET command can be used to retrieve the current RGB adjustment values.
For details, refer to the GET command.
Example Setting
> WBRGB=10, 11, 12
< i:OK
Reference
> GET WBRGB or ?WBRGB
< g:WBRGB=-10, 0, 19
Obtain settable parameter range (Min, Max)
> RANGE WBRGB
< r:WBRGB=N,-20,20,-20,20,-20,20
* Commands are indicated by ">", and responses are indicated by "<".
Commands
SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
× ×
SX50 ○ ○
SX6 × ×
○ ○
SX60
X600
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Menu
[Image adjustments] - [Screen color correction] - [Adjustments]
[Display settings] - [Screen color correction] - [Adjustments]
This sets R to 10, G to 11, and B to 12.
This retrieves the RGB adjustment values.
Any value from -20 to 20 can be set for each color
as the RGB adjustment values.
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video D-Video
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Mode Control Setting Reference
Mode
SCART None Remote
– –
○ ○
○ ○ ○ ○
PAGE 37
9. Details of command WBRGB
Number
Remarks
Local
×
×