Selecting An Input Signal Type (Component); Adjusting Input Signal (Analog Pc) - Total Dots - Canon REALiS WUX10 Mark II User Manual

Selecting an Input Signal Type (COMPO-
NENT)
[Input signal select]
HDMI
DIGITAL PC
ANALOG PC
Input signal select
You can select a proper component signal
type, if a video image from AV equipment
is not projected correctly.
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
• Refer to the User's Manual of your AV
equipment connected to the projector to
confirm the component signal type.
Adjusting Input Signal (ANALOG PC) –
Total Dots
[Input signal settings] - [Total dots]
COMPONENT
VIDEO
Display settings
You can adjust the total number of dots in
the horizontal direction.
Adjust it when stripes are displayed on the
screen.
Use [<] / [>] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO
• You can make adjustment either for
77
Setting Display Status
HDMI
DIGITAL PC
ANALOG PC
Input signal settings
Total dots
PC] function (P52) cannot adjust the
project image correctly.
[ANALOG PC-1] or [ANALOG PC-2].
COMPONENT
VIDEO
Display settings