Get Prodcode - Canon REALiS SX6 User Manual

User Command Specifications
1

GET PRODCODE

GET PRODCODE
Commands
Function Product information inquiry
GET□PRODCODE
Format
?△PRODCODE
Response
g:PRODCODE="<Product name: Character string>"
Product name
For all other responses, refer to "Error List."
Description This inquires about the product name of the projector.
-1 This inquiry can be executed in any status provided that AC power is supplied to the projector.
For the "SX50," the projector must be in the remote mode and power-on status.
Example > GET PRODCODE or ? PRODCODE
< g:PRODCODE="SX50"
* Commands are indicated by ">", and responses are indicated by "<".
Commands SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
○ ○
SX50 × ×
SX6 ○ ○ ○ ○
SX60
X600
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
SX50
SX6
SX60
X600
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Mode Control Setting
Mode
D-Video SCART None Remote
○ ○
– –
○ ○ ○ ○
PAGE 123
9．Details of command GET PRODCODE
Reference
Character
string
Remarks
Local
×
○