Hue - Canon REALiS SX6 User Manual

User Command Specifications
1

HUE

HUE
Commands
Function Hue setting
HUE=<Hue setting value：Number>
Format
Parameter Hue setting (-20 to 20)
The RANGE command can be used to obtain the parameter range that can be set at
that time.
For details, refer to the RANGE command.
Response "i:OK" is returned if the parameter was set properly.
For all other responses, refer to "Error List."
Description This sets the screen hue.
-1 It can be executed when the projector is in both the remote mode and power-on status at the
same time.
A "busy" response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
Furthermore, it may not be possible to execute the command with some input signals.
-2 This command is the same as the menu functions in the table below.
Model
SX50
SX6
SX60
X600
-3 An input signal is required when "VIDEO" or "S-VIDEO" is selected.
-4 This sets the currently selected input signal and image mode.
-5 The GET command can be used to retrieve the current hue.
For details, refer to the GET command.
Example Setting
> HUE=8
< i:OK
Reference
> GET HUE or ?HUE
< g:HUE=1
Obtain settable parameter range (Min, Max)
> RANGE HUE
< r:HUE=N,-20,20
* Commands are indicated by ">", and responses are indicated by "<".
Commands SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
SX50 × × ×
○
SX6
SX60 × × ×
○
X600
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
Menu
[Image adjustments] - [Hue]
[Image adjustments] - [Color adjustments] - [Hue]
This sets the hue to +8.
This retrieves the hue.
Any value from -20 to 20 can be set for the hue.
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video
○ – –
× ×
–
○ ○
– –
○
× ×
–
○ ○
Mode Control Setting Reference
Mode
D-Video SCART None Remote
○
– –
○
×
○
× ×
○
×
PAGE 39
9. Details of command HUE
Number
Remarks
Local
×
×