Range Image - Canon REALiS SX6 User Manual

User Command Specifications
1

RANGE IMAGE

RANGE IMAGE
Commands
Function Image mode setting option request
RANGE□IMAGE
Format
Response r:IMAGE=I, <Setting option 1>, <Setting option 2>, ..., <Setting option n>
For all other responses, refer to "Error List."
Description This inquires about the parameter options which enable the image mode to be set.
-1
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
A "busy" response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
-2 The image mode settings can be selected by the IMAGE command.
Example > RANGE IMAGE
< r:IMAGE=I, STANDARD, PRESENTATION, CINEMA, SRGB
* Commands are indicated by ">", and responses are indicated by "<".
Commands
SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM
D-RGB A-RGB1 A-RGB2 Comp
○ ○
× ×
SX50
○ ○
SX6 × ×
SX60
X600
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video D-Video SCART
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Mode Control Setting Reference
Mode
None Remote
○ ○
– –
○ ○ ○ ○
PAGE 138
9．Details of command RANGE IMAGE
ID
Remarks
Local
×
×