Get Vks/Hks - Canon REALiS SX6 User Manual

User Command Specifications
1

GET VKS/HKS

GET VKS/HKS
Commands
Function Vertical/horizontal keystone setting inquiry
Format
Vertical keystone setting inquiry
GET□VKS
?△VKS
Response
g:VKS=<Vertical keystone setting: Number>
g:HKS=<Horizontal keystone setting: Number>
For all other responses, refer to "Error List."
Description These inquire about the current vertical and horizontal keystone settings.
-1 This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The vertical and horizontal keystone settings can be selected by the VKS and HKS commands,
respectively.
Example > GET VKS or ? VKS
< g:VKS=-23
* Commands are indicated by ">", and responses are indicated by "<".
Commands SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
○ ○
SX50 × ×
○ ○
SX6
× ×
SX60
X600
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* If the necessary signals are not input, 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
Horizontal keystone setting inquiry
GET□HKS
?△HKS
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video D-Video SCART
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Mode Control Setting Reference
Mode
None Remote
○
– – ×
○ ○ ○ ○
PAGE 101
9．Details of command GET VKS/HKS
Number
Remarks
Local
×
×