6Axadj - Canon REALiS SX6 User Manual

User Command Specifications
1

6AXADJ

6AXADJ
Commands
Function 6-axis adjustment ON/OFF
Format 6AXADJ=<6-axis adjustment parameter：ＩＤ>
Parameter
Parameter Meaning
ON
OFF
The parameters which can be set at any given point in time can be obtained using the
RANGE command.
For details, refer to the
Response "i:OK" is returned if the parameter was set properly.
For all other responses, refer to
Description This command is used to select ON or OFF for the 6-axis adjustment.
(1)
It can be executed when the projector is in both the remote mode and power-on status at the same
time.
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the
(2)
In the case of "6-axis adjustment," set the hue and color saturation of each axis using the 6AXR to
Y "6-axis correction R to Y hue/color saturation setting" commands.
(3)
This command functions in the same way as when "Image adjustments" - "6-axis adjustment" are
selected on the menu.
(4) This sets the currently selected input signal and image mode.
(5)
The current 6-axis adjustment setting can be obtained using the GET command.
For details, refer to the
Control
Example
> 6AXADJ=ON
< i:OK
Reference
> GET 6AXADJ or ?6AXADJ
< g:6AXADJ=ON
Acquisition of parameters which can be set
> RANGE 6AXADJ
< r:6AXADJ=I,ON,OFF
*Commands are indicated by ">", and responses are indicated by "<".
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:0002 INVALID_COMMAND" is returned.
Supported Command States
Model Power supply
OFF ON PM
D-RGB A-RGB1 A-RGB2 Comp
SX50
－ － － －
SX6
× ○ × ○
SX60
X600
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
This sets the 6-axis adjustment to ON.
This sets the 6-axis adjustment to OFF.
RANGE command
.
"Error List."
ZCONTDRV command and FCONTDRV command.
GET command
.
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video
－ － － － －
○ ○ ○ ○ ○
Mode Control Setting
）
The 6-axis adjustment is set to ON.
The 6-axis adjustment ON or OFF setting is obtained.
The 6-axis adjustment can be set as "ON" or "OFF."
Mode
D-Video SCART None Remote
－ － － －
○ ○ ○ ○
PAGE 44
９．Details of command 6AXADJ
Reference
ID
Remarks
Local
－
×