Range Dpon - Canon REALiS SX6 User Manual

User Command Specifications
1

RANGE DPON

RANGE DPON
Commands
Function Direct power-on setting inquiry
Format RANGE□DPON
Response r:DPON=I, <Setting option 1>, <Setting option 2>, ..., <Setting option n>
For all other responses, refer to
Description This command is used to inquire about the parameter options which enable direct power-on to be set.
(1) This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the
(2) Direct power-on can be set using the
Example > RANGE DPON
< r:DPON=I, ON, OFF
*Commands are indicated by ">", and responses are indicated by "<".
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
Model Power supply
OFF ON PM
D-RGB A-RGB1 A-RGB2 Comp
SX50
ー ー ー ー
SX6
× ○ × ○
SX60
X600
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
"Error List."
ZCONTDRV command and FCONTDRV command.
DPON command
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video D-Video SCART
ー ー ー ー ー
○ ○ ○ ○ ○
Mode Control
）
.
Mode
None Remote
- - ー ー
○ ○ ○ ○
PAGE 171
９．Details of command RANGE DPON
Setting
Reference
ＩＤ
Remarks
Local
ー
×