Keylock - Canon REALiS SX6 User Manual

User Command Specifications
1

KEYLOCK

KEYLOCK
Commands
Function Keylock setting
KEYLOCK=<Key lock setting parameters：ＩＤ>
Format
Parameter Key lock setting parameters
Parameter Meaning
OFF
MAIN
RC
The parameters which can be set at any given point in time can be obtained using the
RANGE command.
For details, refer to the RANGE command.
Response "i:OK" is returned if the parameter was set properly.
For all other responses, refer to "Error List."
Description This command is used to lock the keys so as to restrict the operations performed using the remote
control or main unit.
-1 It can be executed when the projector is in both the remote mode and power-on status at the
same time.
A "busy" response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
-2 This command is the same as the menu functions in the table below.
Model
SX50
SX6
SX60
X600
-3 This command will not affect the emulation function (remote control or main unit commands)
even if the main unit or remote control keys are locked!
-4 The current key lock setting can be acquired using the applicable GET command.
For details, refer to the GET command.
Example Setting
> KEYLOCK=RC
< i:OK
Reference
> GET KEYLOCK or ?KEYLOCK
< g:KEYLOCK=OFF
Acquisition of parameters which can be set
> RANGE KEYLOCK
< r:KEYLOCK=I,OFF,MAIN,RC
* Commands are indicated by ">", and responses are indicated by "<".
Commands
SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
× ×
SX50 ○ ○
SX6
× ○ × ○
SX60
X600
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
No locking (OFF)
Main key lock
Remote control key lock
Menu
[System settings] - [Key lock]
[System settings] - [Key lock]
This locks the remote control keys.
This retrieves the key lock state.
"OFF," "MAIN" or "RC" can be selected as the key
lock setting.
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video D-Video SCART
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Mode Control Setting Reference
Mode
None Remote
– –
○ ○
○ ○ ○ ○
PAGE 60
9. Details of command KEYLOCK
ID
Remarks
Local
×
×