Get Guid - Canon REALiS SX6 User Manual

User Command Specifications
1
GET GUIDE
GET GUIDE
Commands
Function Guide setting inquiry
Format GET□GUIDE
?△GUIDE
g:GUIDE=<Setting：ＩＤ>
Response
Setting
ON
OFF
For all other responses, refer to
Description This command is used to inquire about the current guide setting.
(1) This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the
(2) The guide can be set using the
> GET GUIDE or ? GUIDE
Example
< g:GUIDE=OFF
*Commands are indicated by ">", and responses are indicated by "<".
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
Model Power supply
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
SX50
ー ー ー ー
SX6
× ○ × ○
SX60
X600
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Meaning
Guide display ON
Guide display OFF
"Error List."
ZCONTDRV command and FCONTDRV command.
GUIDE command
An inquiry is made about the current guide setting.
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video D-Video SCART
ー ー ー ー ー
○ ○ ○ ○ ○
Mode Control
）
.
Mode
None Remote
- - ー ー
○ ○ ○ ○
PAGE 115
９．Details of command GET GUID
Setting
Reference
ＩＤ
Remarks
Local
ー
×