Get Noshowstatus - Canon REALiS SX6 User Manual

User Command Specifications
1
GET NOSHOWSTATE
GET NOSHOWSTATE
Commands
Function NoShow status inquiry
Format GET□NOSHOWSTATE
?△NOSHOWSTATE
g:NOSHOWSTATE=<Status：ＩＤ>
Response
Status
ON
OFF
For all other responses, refer to
Description This command is used to inquire about the current NoShow status.
(1) This inquiry can be made at any time provided that the power-on status is established.
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the
(2) No show status ON/OFF is controlled using the "RC NOSHOW" command in the local mode. (Toggling)
> GET NOSHOWSTATE or ? NOSHOWSTATE
Example
< g:NOSHOWSTATE=ON
*Commands are indicated by ">", and responses are indicated by "<".
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
Model Power supply
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
SX50
－ － － －
SX6
× ○ × ○
SX60
X600
* If the command cannot be supported, "NOT_POWER_SUPPLIED" is returned as an error response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Meaning
Screen temporarily off
Screen not temporarily off
"Error List."
ZCONTDRV command and FCONTDRV command.
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video D-Video SCART
－ － － － －
○ ○ ○ ○ ○
Mode Control
）
Mode
None Remote
－ － － －
○ ○ ○ ○
PAGE 118
９．Details of command GET NOSHOWSTATUS
Setting
Reference
ＩＤ
Remarks
Local
－
○