Autopc - Canon REALiS SX6 User Manual

User Command Specifications
1

AUTOPC

AUTOPC
Commands
Function Auto PC
Format AUTOPC
Parameter None
Response
'i:OK' is returned when control has been executed successfully.
For all other responses, refer to "Error List."
Description Auto PC execution
-1 It can be executed when the projector is in both the remote mode and power-on status at the
same time.
A "busy" response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
Furthermore, it may not be possible to execute the command with some input signals.
-2 This command is identical to pressing the "AUTOPC" button on the remote control or front pane
-3 Execution of this command may modify the following setting values.
・Total number of dots
・Tracking
・Horizontal/vertical positions
・Number of horizontal/vertical display dots
-4 To confirm modified setting values, use the GET command of the respective parameter.
For details, refer to the GET commands below.
Total number of dots
Tracking
Horizontal position
Vertical position
Number of horizontal display dots GET HPIX
Number of vertical display dots
Example > AUTOPC
< i:OK
* Commands are indicated by ">", and responses are indicated by "<".
Commands
SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
× × ×
SX50 ○
SX6 × × ×
○
SX60
X600
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
Setting
GET DOTS
GET TRACK
GET HPOS
GET VPOS
GET VPIX
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video
× × ×
○ ○
× × ×
○ ○
Mode Control Setting
GET
Mode
D-Video SCART None Remote
– – ×
○
× × ×
○
PAGE 20
9. Details of command AUTOPC
Reference
Remarks
Local
×
×