User Command Specifications
1
RANGE VKS/HKS
RANGE VKS/HKS
Commands
Function
Vertical/horizontal keystone setting range request
Format
Vertical keystone setting range inquiry
RANGE□VKS
Response
r:VKS=N, <Minimum setting value>, <Maximum setting value>
r:HKS=N, <Minimum setting value>, <Maximum setting value>
For all other responses, refer to "Error List."
Description
These inquire about the ranges within which the vertical and horizontal keystone can be set.
-1
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
A "busy" response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
-2
The vertical and horizontal keystone settings can be selected by the VKS and HKS commands,
respectively.
Example
> RANGE HKS
< r:HKS=N, -30, 30
* Commands are indicated by ">", and responses are indicated by "<".
Commands
SX50
supported
01.00**
○
Supported Command States
Model
Power
OFF ON
PM
D-RGB A-RGB1 A-RGB2 Comp
○
○
SX50
×
×
○
○
SX6
×
×
SX60
X600
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* If the necessary signals are not input, 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
Horizontal keystone setting range inquiry
RANGE□HKS
SX6
SX60
X600
01.01**
01.01**
01.01**
○
○
○
Input
Video
S-Video D-Video SCART
○
○
○
○
○
○
○
○
○
○
Mode
Control
Setting
Mode
None
Remote
○
–
–
×
○
○
○
○
PAGE 156
9.Details of command RANGE VKS/HKS
Reference
Number
Remarks
Local
×
×