Blank - Canon REALiS SX6 User Manual

User Command Specifications
1

BLANK

BLANK
Commands
Function BLANK function
Format BLANK=<BLANK parameter：ＩＤ>
Parameter BLANK parameters
Parameter Meaning
ON
OFF
The parameters which can be set at any given point in time can be obtained using the
RANGE command.
For details, refer to the
Response "i:OK" is returned if the parameter was set properly.
For all other responses, refer to
Description This command is used to set the BLANK function.
(1) This command functions only when the projector is in the "remote mode ." It cannot be executed
by a menu operation or button operation.
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command
(2) Only a black screen is displayed.
(3) No input signals and none of the on-screen displays appear while BLANK is underway.
(4) The "display setting," "image adjustment" and other commands can be executed even while BLANK
is underway.
However, the "AUTOSETEXE=FOCUS" and "AUTOSETEXE=SCRN" commands cannot be executed.
Refer to the
(5) The BLANK function is released in the following situations.
a. When the POWER button on the remote control or panel has been pressed
b. When power management standby countdown has started
c. When the mode has been switched from remote to local
d. Power Off
(6) The current BLANK settings can be obtained using the GET command.
For details, refer to the
Example Setting
> BLANK=ON
< i:OK
Reference
> GET BLANK or ?BLANK
g:BLANK=ON
Acquisition of parameters which can be set
> RANGE BLANK
< r:BLANK=I, OFF, ON
*Commands are indicated by ">", and responses are indicated by "<".
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:0002 INVALID_COMMAND" is returned.
Supported Command States
Model Power supply
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
SX50
－
SX6
× ○ × ○
SX60
X600
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
BLANK ON
BLANK OFF
RANGE command
.
"Error List."
AUTOSETEXE command.
GET command
.
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video D-Video SCART
－
○ ○ ○ ○ ○
Mode Control Setting
）
.
BLANK is set to ON.
The current BLANK status is referenced.
Mode
None Remote
－
○ ○ ○ ○
PAGE 18
９．Details of command BLANK
Reference
ＩＤ
Remarks
Local
×