Rgbgain - Canon REALiS SX6 User Manual

User Command Specifications
1

RGBGAIN

RGBGAIN
Commands
Function RGB gain adjustment
Format RGBGAIN=<R gain setting：Number>▽<G gain setting：Number>▽<B gain setting：Number>
Parameter RGB gain settings (from -20 to 20 for each value)
The RANGE command can be used to obtain the parameter range that can be set at that time.
For details, refer to the
Response "i:OK" is returned if the parameter was set properly.
For all other responses, refer to
Description This command is used to adjust the gain of the R, G and B colors.
(1)
It can be executed when the projector is in both the remote mode and power-on status at the same
time.
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the
(2)
This command functions in the same way as when "Image adjustments" - "Color adjustments" -
"Red/green/blue gain" are selected on the menu.
(3)
This sets the currently selected input signal and image mode.
(4)
The current RGB gain values can be obtained using the GET command.
For details, refer to the
Example Setting
> RGBGAIN=10, 11, 12
< i:OK
Reference
> GET RGBGAIN or ?RGBGAIN
< g:RGBGAIN=-10, 0, 19
Obtain settable parameter range (Min, Max)
> RANGE RGBGAIN
< r:RGBGAIN=N,-20,20,-20,20,-20,20
*Commands are indicated by ">", and responses are indicated by "<".
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:0002 INVALID_COMMAND" is returned.
Supported Command States
Model Power supply
OFF ON PM
D-RGB A-RGB1 A-RGB2 Comp
SX50
－ － － －
SX6
× ○ × ○
SX60
X600
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
RANGE command
.
"Error List."
ZCONTDRV command and FCONTDRV command.
GET command
.
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video D-Video SCART
－ － － － －
○ ○ ○ ○ ○
Mode Control
）
The R gain is set to 10, G gain to 11 and B gain to 12.
The RGB gain values are obtained.
A number from -20 to 20 can be set for each color as
the RGB gain values.
Mode
None Remote
－ － － －
○ ○ ○ ○
PAGE 40
９．Details of command RGBGAIN
Setting
Reference
Number
Remarks
Local
－
×