Adjusting The Input Signal (Total Dots); Adjusting The Input Signal (Tracking) - Canon WUX6000 User Manual

Adjusting the Input
Signal
(Total dots)
> [Input settings] > [Input signal
settings] >
HDMI
Digital PC
You can adjust the total number of
dots in the horizontal direction.
Adjust it when stripes are displayed
on the screen.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button.
• Perform this adjustment if the Auto PC
function (P43) cannot adjust the projected
image correctly.
Downloaded From projector-manual.com Canon Manuals
[Total dots]
Component LAN
Analog PC USB
Setting Display Status (Input Settings)
Adjusting the Input
Signal
(Tracking)
> [Input settings] > [Input signal
settings] >
HDMI
Digital PC
You can fine-tune the timing for
generating an image from the image
signal.
Adjusts the tracking when the image
distorts or flickers.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button.
• Perform this adjustment if the Auto PC
function (P43) cannot adjust the projected
image correctly.
77
[Tracking]
Component LAN
Analog PC USB